CAD GXL2200 Condenser Microphone
About This Product!
Description
The GXL2200 is a large diameter, fixed cardioid pattern, condenser microphone. High sensitivity and low distortion make this microphone an ideal candidate for recording, broadcast, sound reinforcement including vocal and instrument applications. The capsule in the GXL2200 features a 1 in. gold vapor deposited diaphragm.

Power
The GXL2200 requires standard 48-volt phantom power

Swivel Mount
The GXL2200 comes with a swivel mount that will fit any standard 5/8 in. x 27 threaded microphone stand. The swivel mount can be removed by unscrewing the knurled ring on the bottom of the microphone.

CAD Quality
The GXL2200 microphones are audio tested and inspected under the direction of CAD Professional Microphones, offering an exceptional level of value.
Technical Info
Generating Element: Externally-Biased True Condenser

Polar Pattern: Unidirectional (Cardioid)

Frequency Response: 30 Hz - 20 kHz

Sensitivity: -53dB 0dB=1V/uBar @ 1 kHz

Impedance: Less than 200 ohms

Equivalent Noise Level: Less than 20dB (A-weighted)

Power: 48 Volts Phantom Power

Connector: 3-pin XLR type

Phasing: Positive diaphragm pressure produces a positive voltage on pin 2 with respect to pin 3.

Dimensions: 2.17 in. x 7.72 in. (55mm x 196mm), Mic only

Weight: 14.1 oz. (400 grams), Mic only
---------------------------------------------------------

че скажите по поводу этого микрофона?
стоит брать?

или может вот этот M-Audio Nova Condenser Microphone?

Using manufacturing breakthroughs pioneered by M-Audio's popular Luna and Solaris, the new Nova cardioid microphone redefines the entry-level price point for quality studio condenser microphones. Its 1.1 in. evaporated gold diaphragm is mounted in a solid brass capsule, ensuring recordings that are faithful to the source, and the Class A solid state electronics are engineered for low noise, distortion and coloration. At this staggeringly low price, these puppies will turn up everywhere.

Features:
Affordable large capsule cardioid condenser

1.1 in. evaporated gold diaphragm

Solid brass body and capsule

20Hz-18kHz frequency response

Includes hard mount, soft case and XLR cable
Technical Info
Type: Large diaphragm condenser, gold evaporated

Polar Pattern: Cardioid

Frequency Response: 20 Hz-18 kHz

Sensitivity: 16 mV/Pa (-36 dBV)

Max. SPL for 0.5% THD: 128 dB

Equivalent Noise Level: 14 dB A weighted

Output Impedance: 200 ohms

Recommended Load Impedance: > 1,000 ohms

Preamp Topology: Class A FET preamp

Power Requirement: 48V phantom power

Connector: 3-pin male XLR

Grille and Body: Wire mesh grille and body, all brass

Finishing: Silver nickel plating

Size: 7.3 in. (h) x 1.9 in. (w)

Weight: 23 oz.

--------------------
помагите люди срочно надо