-Цитата от Kreat
друзья,как настроить пэды на определённые ноты?из мануала хуй я чё понял
Легко это делается.
- Жмешь пэд который настроить хочешь
- потом кнопу Ctrl Assign
- цифрами набираешь 147
- жмешь Data 1
- и вводишь назначаемую ноту на пэд исходя из таблицы B2 мануала (правда тут есть некоторое несоответствие. например во фруктовом FPC идет смещение на две октавы вниз, то есть ноте C#3 соответствует нота C#1 из таблицы по крайней мере у меня так.)
- кнопки data 2 и data 3 - задается ограничение нижнего и верхнего значения velocity для данного пэда
PS это для Axiom 49/61
для 25 чуть больше шагов но смысл тот же
< Select the pad as described in section 2.
< Press the Advanced button.
< Press the Ctrl Assign key.
< The LCD display will flash the currently assigned controller for the pad.
< Enter 147 for Note on/off (press/release), or 148 for note on/off toggle
< Press the Enter key to confirm.
< Press the Advanced button again.
< Press the Data 1 key.
< The LCD display will flash the currently assigned note for the pad.
< Enter the note number you want the pad to transmit using the numeric keypad.
< Press the Enter key to confirm.
< Press the Advanced button again.
< The Data 2 and Data 3 keys can be used to specify the note off velocity, and note on velocity respectively.